effective isolation of noise and vibration generated from equipment
A selection of resilient hangers is an integral part of the total isolation system design, and the deflection of hangers for pipes and ductwork immediate to the equipment should be similar to the isolators supporting the equipment.
For assistance in selecting the correct isolator suitable to your application, please use our Isolator Selection Guide.
ISOLATION HANGERS
Rubber Isolation Hanger
Where a low cost, low deflection hanger is required for effective isolation of noise and vibration from equipment with speeds of 1,000 RPM upwards. Typically used for piping, ductwork, fans, packaged air conditioners, fan coil units and suspended ceilings.
ISOLATION HANGERS
Spring Isolation Hanger
For support of equipment and pipework where a low cost hanger is required for effective isolation of vibration. Typically used for support of piping and ducts, fans, packaged air conditioners, fan coil units, attenuators and headers.
ISOLATION HANGERS
Rubber and Spring Series Isolation Hanger
For support of pipework and equipment with speeds down to the order of 500 RPM requiring effective isolation of both mechanical vibration and acoustic level frequencies. Typically used for support of piping and ducts, flow speed fans, packaged air conditioners and attenuators.
ISOLATION HANGERS
Isolation Hanger Elements
RHE/RHDE, KDXS, KDX, KDXW
Required for effective isolation of noise and vibration from equipment, isolation hanger spring and rubber elements are typically used for trapeze-supported piping, packaged air conditioners, fan coil units and fans; particularly where height limitations are present.
ISOLATION HANGERS
Expansion Control Isolation Hangers
For the support of piping where considerable vertical movement is experienced through thermal variations, allowing minimal transfer of loads to anchor points. The Expansion Control Isolation hanger is typically used on risers in multi-storey buildings and in high temperature piping systems.
