Skip to content

Seeking Advice?

T: 1800 339 638

Isolating Noisy HVAC equipment

Embelton provides a range of vibration mitigation products for water based HVAC systems, including for indoor units, heat pumps, pipes, silencers, chillers, cooling towers and boilers.

Technical Datasheets Isolator Selection Guide

Indoor unit

Located inside the building, this unit absorbs heat from indoor air and transfers it to the chilled water circuit and/or heats indoor air using heated water from the hot water circuit.

ISOLATION SOLUTIONS +

CHE / RH / SHS / KDXSS

Technical Datasheets

Pump & Inertia base

Pumps are used in water-based systems to circulate condenser, chilled or hot water through pipes. They are often mounted on inertia bases for stability.

ISOLATION SOLUTIONS +

NR-D / XS / CSM / Impactamat

Technical Datasheets

Fan & silencer

Fans move air throughout HVAC systems and are found on most pieces of equipment. Some fans have silencers to reduce airborne noise. 

ISOLATION SOLUTIONS +

NR-D / XS / CSM / Impactamat

Technical Datasheets

Chiller

A chiller is a large cooling unit that removes heat from water and sends it through a hydronic system to provide cooling. Chillers can be air-cooled (reject heat to the air) or water-cooled (use cooling towers).

ISOLATION SOLUTIONS +

XS / CSM / XLM / SSF / Impactamat

Technical Datasheets

Cooling Tower

A cooling tower is used in water-cooled chiller systems to reject heat from the refrigeration system. It transfers heat from condenser water to the atmosphere via evaporation.

ISOLATION SOLUTIONS +

NR / SSF isolated sleeve 

Technical Datasheets

Plate Heat Exchanger or Expansion Tank

A plate heat exchanger transfers heat from one water circuit to another. Tanks are used to store thermal energy or allow for thermal expansion of water.

ISOLATION SOLUTIONS +

SSF isolated sleeve

Technical Datasheets

Pipes

Pipes carry chilled, condenser or hot water between components.

ISOLATION SOLUTIONS +

XS / RH / SHS

Technical Datasheets

Boiler

A boiler is used in water-based heating systems to generate hot water, which is then distributed through pipes to provide heating via radiators, air handling units, or underfloor heating systems. Boilers can be heat pump, gas-fired, electric, or oil-fired.

ISOLATION SOLUTIONS +

NR / SSF / XS / CSM

Technical Datasheets

Heat Pump

Within a water circuit, a heat pump provides heated water that is distributed throughout the building to fan coils and air handlers.

ISOLATION SOLUTIONS +

NR-D / SF / SSF / XS / CSM

Technical Datasheets

Generator

A generator provides backup power to buildings. This is critical for mission-critical facilities like hospitals, data centres, and high-rise buildings.

ISOLATION SOLUTIONS +

XS / CSM / XLM / SSF isolated sleeve / Impactamat

Technical Datasheets